Windows combination B2/1 - Flashing for changing window installation angle by 10° EHA-PT + Centre pivot window FTP-V U3 | FAKRO

Windows combination B2/1 - Flashing for changing window installation angle by 10° EHA-PT + Centre pivot window FTP-V U3 | FAKRO

Windows combination B2/1 - Flashing for changing window installation angle by 10° EHA-PT + Centre pivot window FTP-V U3 | FAKRO

Combination flashing are ready made flashing systems for joining windows in groups: horizontally, vertically and in a block. The distance between windows joined horizontally and vertically is normally 10cm. If external shutters are installed on windows installed vertically, a gap of at least 20cm is required. The FAKRO combination system enables the installation of all types of windows, top hung and pivot windows as well as centre pivot. There are seven modules in the FAKRO combination system, to cater for any layout you may require. The “Module” is a single and properly marked element of the flashing and assigned to its specific place in combination.


Flashing for changing window installation angle ESA EZA-P EHA-P E_A. The flashing is ideal for a flush fit of the window with low pitch roof coverings of 10° or more. It enables the installation angle to be raised by an additional 10°. Is used in mansard roofs, in extensions and adaptations of low pitched attics in order to extend space in the attic. It is commonly used to install with single windows in roof slopes. The flashing is also used in modules for horizontal joining of the windows, (in such combinations a distance of 20cm between the windows is required).

There are three flashing type available, the use of which is dependent on the roof covering:

  • ESA flashing–a flat covering with a profile depth of 10 mm (2 x 5 mm), for use with slates and similarly flat roof coverings
  • EZA-P flashing–a profiled covering up to 45mm, for use with roof tiles and profiled sheeting
  • EHA flashing–a profiled covering up to 90mm, for use with roof tiles, corrugated and deep profiled sheeting

Can be used on roofs with pitches between 10° and 75°.

Erittely

Product family: Roof window flashings Product group: Flashing for changing window installation angle
Main material: Wood Designed in: Poland
Manufactured in: Poland Publishing date: 30.6.2022
Installation instruction Technical description
Product page Instruction video
Revit Revit Revit Family Type Catalog Revit Family Type Catalog

Liittyviä tuotteita

Kattoikkunat

Kattoikkunat

Tuo päivänvalo sisätiloihin. Kattoikkunoissamme yhdistyvät valoisuus, ympäris...

Vitrea Oy

Tilaa Rakennusfaktan uutiskirje – saat tuoteuutiset viikoittain sähköpostiisi

Sulje